Sell a property that has a tenant
To move a property to another landlord without the Sales area, or to correct a wrong landlord, see Change a property’s landlord. A property you let can be put up for sale while it is let. You choose whether it is sold with the sitting tenant (an investment sale) or with vacant possession, the tenant is given notice of viewings, and on completion you hand the property over to the buyer, either as a new landlord your agency manages for or with your management ending. The Sales area needs the Professional plan or above.
Choose the sale type
Section titled “Choose the sale type”When you create a sales instruction under Sales > Pipeline with New instruction, every property without a live instruction is listed, let ones included, with a badge showing its letting status. For a let property:
- Vendor. If the landlord is already a vendor (matched by email), they are filled in and marked From owner. Otherwise Use the landlord as vendor creates the vendor from the landlord’s name, email and phone in one click.
- Sale type. With sitting tenant is chosen when the unit is let, Vacant possession when it is empty. The step shows the current tenancy: rent, “Periodic since [start]” (or “Ends [date] (notice given)” once an end is recorded), the deposit, and the yield at the asking price.
- If you choose vacant possession on a let unit, the app warns that the tenancy must end lawfully before completion (usually notice on ground 1A: four months, not in the first 12 months of the tenancy), and that after possession on ground 1A the unit cannot be let, or marketed to let, for 12 months, even if the sale falls through. If you choose a sitting tenant on an empty unit, it warns that there is no tenant to sell with.
- A unit recovered on Ground 1A or Ground 1. The instruct wizard and the Create instruction window warn: “This unit was recovered on ground 1A (the landlord selling). It cannot be let, or marketed to let, until [date], even if the sale does not go ahead.” For Ground 1 (the landlord or family moving in) the warning adds that selling now may mean the ground was not used properly: take advice before instructing. See The Ground 1 or 1A re-let lock.
The sale type shows on the instruction’s terms, with a Sitting tenant card (rent, tenancy, deposit, yield at the asking price). You can change it later with Edit instruction; the change appears on the property’s timeline. See Register vendors and instruct a property for sale.
What changes on the property and what buyers see
Section titled “What changes on the property and what buyers see”While a let property has a live sales instruction, its page shows a banner Also for sale with the instruction’s status and Open the sales instruction; the lettings tabs carry on as before. In the Properties list it appears under For sale and stays under To let, and its own status stays Let. A pre-market instruction keeps it advertised to let; once the sale is put on the market, your website listing shows it for sale with the tenancy facts (rent, term, deposit, yield), never the tenants’ details. A property being sold with a sitting tenant, or whose sale is still Pre-market, can stay or be listed To Let; only a vacant-possession sale that is on the market stops it being listed to let. The printed brochure shows COMING SOON while the instruction is Pre-market and FOR SALE once it is on the market, with an Investment block: rent, term (“Periodic since [start]”, or “Ends [date]” only once an end is recorded), gross yield, and the deposit scheme only once the deposit is recorded as protected, so protect it before printing particulars. See Take and protect a deposit.
Viewings at a let home need the tenant’s notice
Section titled “Viewings at a let home need the tenant’s notice”When you book a viewing at a let home, LintelCRM asks how the tenant is told: Notify the tenant from LintelCRM (a portal notification, and an email if they get emails, with the date and time only, never who is viewing) or I have given the tenant written notice another way. A viewing less than 24 hours away needs you to confirm the tenant has agreed to the shorter notice. If you gave notice another way, you enter Notice given on, and the 24 hours count from then. The same question comes back if you move the viewing, and the notice of the new time is counted from the move. The full rules are in Book and manage viewings.
Completion with vacant possession
Section titled “Completion with vacant possession”When you record completion on a sale with vacant possession and the unit is still let past the completion date, the Record completion window warns that the tenancy does not end by completion, and Confirm Completion stays disabled (“End the tenancy first, or confirm the buyer takes the tenant on”). End the tenancy first with End tenancy, or, if the buyer has agreed to take the property with the tenant in place, tick The buyer is taking the property with the tenant in place and complete; then hand the property over as below. See End a tenancy and Track a sale through conveyancing.
Hand the property over to the buyer
Section titled “Hand the property over to the buyer”After a sale with a sitting tenant is completed, the sale’s page shows Hand over to the buyer. It opens a three-step guide:
- Who is the new landlord? Use the landlord already set up with the buyer’s email (Already a landlord here), or Set the buyer up as a new landlord, with the name, email and phone filled in from the sale.
- After completion. Choose The agency manages it for the buyer and enter the commission and how often to pay the landlord (a management agreement is created starting on the completion date, unless they already have one in force), or Management ends.
- Review the hand-over. It lists every ledger entry that will be recorded (rent apportioned to the new owner with dates and days, commission refunded to the seller, commission charged to the buyer if you manage for them), both balances afterwards, whether the seller gets a final statement, and what happens next.
Select Hand over. It is recorded once, even if clicked twice, and the section then shows what was done, with Open the new landlord and, when you manage for them, Invite to the landlord portal. The hand-over is available only after completion, only once per sale and only while the unit is let; otherwise the reason is shown. See When the hand-over is refused.
When the hand-over is refused
Section titled “When the hand-over is refused”Hand over to the buyer on a completed sale with a sitting tenant is not offered, and the sale’s page gives the reason, in these cases:
- The sale is not completed yet, it was already handed over, or the unit has no tenancy (the buyer took it empty).
- The property was already moved to the buyer with Change landlord on the lettings side.
- The property has more than one unit. “This property has more than one unit. Handing over the sale of one of them would make the buyer the landlord of the whole property and of every unit’s rent, so it cannot be done here yet.” A landlord is recorded for a whole property, so one flat of a block, an HMO room or any unit of a multi-unit property cannot be handed over this way, however the block is listed. The sale itself can still be instructed, progressed and completed. What to do instead: flats that may be sold separately with a tenant in place must be set up as separate properties, one property for each flat, before the sale is instructed, so each has its own landlord and its own hand-over. A landlord for each flat within one property is planned for a later version of LintelCRM.
- The next tenancy on the unit is already signed. “The next tenancy on this unit is already signed, starting 27 Feb 2027. The hand-over only moves the current tenancy: delete the signed tenancy first, or hand over once it has started.” This applies whether your agency will manage for the buyer or management ends, so a tenancy the buyer did not take on is never left charging rent.
- Your data was imported and the sale completed before your switch-over date. “This property was brought over from your previous system on [date]: a sale that completed before then is already in the balances brought over, so it cannot be recorded here.” The balances brought over already reflect that sale, and the property was imported with its new landlord. Sales completing on or after the switch-over are recorded as usual. See Bring your data over from another system.
Nothing is recorded when a hand-over is refused: no ledger entry, no change of landlord and no task.
If your agency manages it for the buyer
Section titled “If your agency manages it for the buyer”When you hand over with The agency manages it for the buyer, the tenancy, rent collection and deposit carry on in LintelCRM, and the buyer becomes the landlord on the property, on statements and in the landlord portal from the day after completion. Two tasks are created: Tell the tenant about the new landlord (due by the next rent day or two months after completion, whichever is later) and Transfer the deposit protection to the new landlord (due 30 days after completion). Moving the deposit is done in the deposit scheme; LintelCRM creates the reminder but does not move it. See Take and protect a deposit.
If management ends
Section titled “If management ends”When you hand over with Management ends, the buyer does not use your agency and the tenancy carries on with them. The buyer’s days of rent are held for them with no commission, and you pay them with Pay landlord. Your record of the tenancy closes at the end of the rent period already charged (no refund, nothing cut short), and from the next rent day the new owner collects the rent; the tenancy shows “Management ended: sold to [buyer] on [date]”. The tenant is not sent a “tenancy ended” email, and the deposit stays recorded as held, with no return task, until you hand it over. Tasks are created: Hand the deposit over to the new owner (30 days), tell the tenant you no longer manage the property (7 days), remind the new owner of their notice to the tenant, and pay the new owner and send a closing statement (7 days). When the deposit has gone to the new owner or their agent, record it on the deposit with Transfer to new landlord and the scheme’s transfer reference; the deposit then reads Transferred to new landlord and your agency no longer shows it as held. See Transfer the deposit to a new landlord. The property then shows Sold: no longer managed by the agency: it leaves the To Let and Let lists (find it under Sold), its certificates are no longer chased, and money still owed on it stays visible. See Pay a landlord.
How rent is shared between seller and buyer
Section titled “How rent is shared between seller and buyer”The hand-over review (or the Change landlord preview) lists every entry that will be recorded and the balance each landlord will have afterwards. The rules LintelCRM applies when a property is sold with a sitting tenant:
- The seller owns the property up to the end of the completion day.
- Rent that was already paid for a period running past completion is split by days at an equal daily rate over a 365-day year. The new owner gets the days after completion; the seller keeps the rest.
- A rent period never runs past the end of the tenancy. If the tenancy has ended, the new owner gets no rent for days after it.
- The seller’s commission on the part passed on is refunded to the seller. The new owner is charged commission at their own management agreement rate, or none if management ends.
- Arrears for earlier periods stay with the seller, including arrears brought over from your old system at an import. The buyer is never given part of them.
- A charge made by the day, a first part period or the days bridged by a due date change, that runs across completion is shared by its own days: the buyer gets their days of it.
- A tenant’s repayment of credit refunded from a payment that was reversed is never shared: it was never either landlord’s money.
- Unpaid rent is not moved. Only rent that has actually been received is apportioned. Rent paid from the tenant’s credit counts as received.
- Recording the sale after completion is normal. Rent the seller already received for days after completion is passed to the new owner once, whatever you do afterwards (assign the landlord again, correct the buyer, a payment bounces).
On the seller’s statement the passed-on rent appears as Rent passed to the new owner, not as a cost. Entries are never edited: they are reversed and re-posted, so the history stays visible in the landlord ledger.
If the seller had already been paid rent that now belongs to the buyer, their balance goes below zero and LintelCRM creates a task on the seller, Recover rent paid to the seller after completion, due in 3 days, with the overdrawn amount and the completion date. Recover the money from the seller, or offset it against money they are owed; their landlord page shows that the landlord owes the agency.
When the seller gets a final statement
Section titled “When the seller gets a final statement”When a property is sold, the seller’s Final statement is produced only when the sale leaves them with no property managed by your agency (archived properties do not count). The review tells you which case applies. The final statement is issued automatically when the hand-over (or change of landlord) is confirmed, and runs from the 1st of the completion month to the completion date. If money for that seller arrives later (late rent for their days, for example) and they still have no property with you, a Further statement is prepared covering the days from the day after their last statement to the date of the money. A seller who still has another property gets none of this: the sale appears on their regular statements. See Landlord statements.
Change the landlord by hand
Section titled “Change the landlord by hand”You can still record a sale on the lettings side without the Sales area: open the property, go to People, select Change landlord and choose The property was sold to a new owner (the tenant stays). The steps, the completion date, the final statement and the tenant notice are in Change a property’s landlord. The money rules above apply. Use it for a sale your agency did not handle; if a property was moved to the buyer this way, Hand over to the buyer on the sale is refused. The other option, The wrong landlord was entered, is for corrections: “Everything recorded for this property moves to the right landlord, with correcting entries in the wrong landlord’s account. Payments already made to the wrong landlord are not moved.” It does not apportion rent. See Add a landlord and Management agreements and commission.
Common problems
Section titled “Common problems”Confirm Completion is greyed out. The sale is with vacant possession and the tenancy runs past completion. End the tenancy first, or tick that the buyer is taking the property with the tenant in place.
Hand over to the buyer is missing or refused. The sale is not completed yet, it was already handed over, the unit has no tenancy (the buyer took it empty), the property was already moved to the buyer with Change landlord, the property has more than one unit, the next tenancy on the unit is already signed, or the sale completed before your data was imported. The reason is shown. See When the hand-over is refused.
The brochure shows no deposit scheme. The deposit is not recorded as protected yet. Record the protection, then print again.
The app says to add a management agreement first (Change landlord by hand). The new owner’s agreement must start on or before the completion date. Add it, then reopen Change landlord.
“No money is recorded on this property yet”. There is nothing to apportion. The landlord is assigned directly.