Skip to content

Bring your data over from another system

If you are moving to LintelCRM from another lettings system, the LintelCRM team imports your data for you. There is no self-service import screen or CSV upload in the app. This guide explains what is brought over, how money and deposits arrive, and what to check afterwards.

Imports are run by the LintelCRM team, never by the agency. You send the team the exports from your old system (or CSV files in the team’s templates) taken at the close of the day before your switch-over date, and the team checks them in a trial run that writes nothing and lists every figure, before importing them into your workspace. Agree with the team what is imported and when, so you do not enter the same records twice. See Set up your agency.

An import from your old system can bring in:

  • Landlords, with the balance you held for each on the switch-over date (or what they owed you).
  • Management agreements, the one in force for each landlord, with its real start date, commission percentage, payout frequency, fees and emergency authority. Only percentage commission is supported.
  • Properties and units, tenants and running tenancies, with what each tenant owed or had paid ahead on the switch-over date. A block can be brought in with each flat listed on its own, some for sale and some to let; see Add a property. Tell the team before the import which flats could be sold separately with a tenant in place: those are imported as separate properties, one for each flat, because a landlord is recorded for a whole property.
  • Deposits: amount, date received, scheme, protection certificate and date, and the date the prescribed information was served.
  • Compliance certificates and photos.

Not brought over: tenancies that ended before the switch-over, former tenants’ debts, tenant debts other than rent (fees, damage), payment history, and fixed-amount management fees. See Management agreements and commission.

The switch-over date is the day you stop using your old system. Rent due before it was charged and collected in the old system and is never charged again in LintelCRM, so old rent never shows as owed. Each tenancy is charged from its first due date on or after the switch-over, on its own schedule. Later changes, such as a back-dated rent increase, never charge before the switch-over either. See Rent schedule and due dates.

Tenancies and the Renters’ Rights Act in an import

Section titled “Tenancies and the Renters’ Rights Act in an import”

Imported tenancies follow the Renters’ Rights Act (England, from 1 May 2026), so tell the team what your old system holds:

  • Every assured tenancy is imported periodic. An end date your old system holds for it is kept only as the original fixed term: staff see “Original fixed term to [date]: no longer applies since 1 May 2026”, rent continues, and the trial run lists it as a warning. Landlords and tenants never see that date.
  • A let that is not an assured tenancy (let to a company, rent over £100,000 a year, resident landlord or holiday let) keeps its fixed term if you tell the team which lets these are and why. If its term ended before the switch-over and the tenant stayed on, it is imported periodic.
  • Quarterly or yearly rent is accepted only for a tenancy that started before 1 May 2026, or for a row with a not-assured reason; an assured tenancy that started later is refused in the trial run.
  • Information Sheet: for tenancies from before 1 May 2026, send the date the Renters’ Rights Act Information Sheet was given to the tenants, if you have it. It shows on the tenancy as RRA Information Sheet given on. Afterwards the team can list the tenancies with no date, so you can serve the sheet late.
  • Last rent increase: send the date of each tenancy’s last rent increase, so the section 13 rule of 52 weeks between increases counts from it. See Change the rent or a tenancy’s details.
  • Let listings brought over from your old system are cleaned of advert wording the Act does not allow: a sentence or line such as “No DSS” or “Minimum tenancy term is 6 months” is removed, and “No pets” becomes “Pets considered on request”. The team’s report lists every change and the wording kept for you to check (“Professionals only”, for example). See Photos and documents.
  • The advertised-rent check for new tenancies does not apply to imported tenancies.

For an imported tenancy, a tenant who owed rent on the switch-over date gets one charge dated the day before it, Opening balance brought forward from [your old system]. It counts as arrears everywhere (the Arrears page, the tenancy, the dashboard and both portals), is chased and can be written off like any other rent, and payments pay it first. When the tenant pays it, the landlord is credited with it as rent, less commission under the agreement in force that day. A tenant who had paid ahead has that amount held as tenant credit, which pays their rent as it falls due. Tell the team whether your old system had already paid that money to the landlord, so the landlord is not paid twice. See Rent arrears.

Sometimes a tenant paid your old system for rent that falls due on or after the switch-over date, for example December’s rent paid on 28 November when you switch over on 1 December. LintelCRM charges that rent, so it would show as owed, but the money is already in your old system’s books and in the landlord balance brought over.

That rent is marked Paid in previous system. The periods stop being owed and are not chased, and no money is recorded: nothing reaches the client account, the landlord’s ledger or a statement. The LintelCRM team can mark everything due up to a date for a tenancy as part of the import, and your own staff can mark or reverse individual rent periods afterwards from the tenancy’s Financials tab. Every mark keeps its note and is never deleted. See Mark rent paid in your previous system.

A sale that completed before the switch-over

Section titled “A sale that completed before the switch-over”

If a let property was sold with its tenant before your switch-over date, do not record that sale in LintelCRM. The balances brought over already include it, and the property was imported with its new landlord. LintelCRM refuses it: “This property was brought over from your previous system on 1 Dec 2026: a sale that completed before then is already in the balances brought over, so it cannot be recorded here.” This applies to Hand over to the buyer on a sale and to Change landlord with the sold option.

A sale that completes on or after the switch-over date is recorded as usual, and rent is shared between seller and buyer by the day. See Sell a property that has a tenant.

Each imported landlord’s ledger opens with one line dated the day before the switch-over, Opening balance brought forward from [your old system]: money you held for them, or what they owed you. It is not income: it is in no tax summary box and no commission is taken on it. Every statement from the switch-over month opens with it, and it counts as due at the landlord’s next payout, so it shows as overdue if that payout day has passed. Commission is taken on rent collected after the switch-over, including old arrears when they are paid. See Landlord ledger.

An imported deposit recorded as protected shows as Protected, and the tenant is not emailed. A deposit you hold but had not protected shows the protection task, overdue at once if 30 days have passed since you received it: that is a real compliance gap to fix. A deposit taken before 1 June 2019, for a tenancy that began before then, is brought in as it is even if it is above today’s five-week cap; later deposits above the cap are refused, as in the app. Deposits never appear on a landlord’s ledger. See Take and protect a deposit.

If automatic arrears chasing is switched on, overdue rent brought over from your old system, including the balance brought forward, is counted from the import day. The first daily check after the import sends nothing, the Day-3 reminder follows three days later, and the Day-7 letter and Day-14 escalation follow only if nothing is paid. The emails still show the real due date. Pause chasing on a tenancy if you are already dealing with that tenant. See Rent arrears.

Check the first month’s rent on tenancies made from applications

Section titled “Check the first month’s rent on tenancies made from applications”

The whole amount a tenant paid as first month’s rent on an application is now recorded on the tenancy created from it. When the tenancy starts part-way through a month, the first part period is paid first and the rest pays the next rent as it falls due (it is held as credit until then). Tenancies created before this change may have recorded only the first charge. The LintelCRM team checks them before go-live with a report that changes nothing: lettings:report-first-month-rent-shortfalls, optionally limited to one business or one tenancy.

For each tenancy where the application recorded more than the tenancy holds, it prints a line such as: tenancy [id] (application [id], business [id]): paid GBP 1,200.00 on [date] (“[reference]”), recorded 900.00, missing 300.00. Record a rent payment of 300.00 dated [date] with that reference. It ends with “[report only] [n] tenancy(ies) with first month’s rent missing ([amount] in all). Nothing was changed.” Record each missing payment as an ordinary rent payment (see Record a rent payment); once recorded, the tenancy no longer appears. The report never adds money itself, and a clean run lists nothing.

Once the import is done, compare LintelCRM with your old system’s records as at the switch-over:

  • each tenant’s arrears against your old arrears report, plus any rent due since the switch-over;
  • each landlord’s balance against your old client ledger, and the client-account total against your old client account (plus any deposits you hold yourself);
  • the deposit list against your deposit register;
  • any tenant showing rent as owed that they paid to your old system before the switch-over: mark it Paid in previous system, do not record a payment.

Record in LintelCRM any payment you received after the switch-over date, and invite tenants and landlords to their portals when you are ready. See Getting started checklist.