Skip to content

Add a property

You add a property from Properties with the New Property button. The Add property form takes you through eight steps, and four of them (landlord or vendor, media, deposit and compliance) are optional. You can save part-finished work and come back to it.

  • You need a role that can create properties: the owner, an admin, a Full Agent or a Lettings Agent. A Sales Agent can view properties but not create them.
  • For a letting, add the landlord first if you can. See Add a landlord. You can also add the landlord from inside the form, or assign one later.
  • Have the address, the number of bedrooms and bathrooms, and the rent (or asking price) to hand.
  1. Go to Properties and select New Property.
  2. Type & purpose. Choose Single-unit (one rentable unit such as a house, flat, studio or commercial space) or Multi-unit (several rentable units such as apartments, offices or retail). Then choose To Let (available for rent, you will assign a landlord) or For Sale (available for sale, you will assign a vendor).
  3. Property details. Enter the Property name, Property type (Residential, Commercial, Mixed-use or Land), Address line 1, City, Postcode and Country. Address line 2, County / State and Year built are optional. You can also place a pin on the map: type in the map’s address search to get suggested UK addresses and pick one to drop the pin, or click the map or drag the pin. The pin powers the map on your website, and the property still lists without it.
  4. Units. For a single unit enter Bedrooms and Bathrooms (use 0 for commercial), and the Rent PCM (£) for a letting or the Asking price (£) for a sale. Size (sq ft) and Furnishing are optional. For several units, give each a Unit label (for example Flat 1A) and select Add another unit.
  5. Landlord / vendor (optional). Pick the landlord for a letting, or the vendor for a sale. Select Add New to create one without leaving the form. You can also assign or change the owner later from the property page.
  6. Description & media (optional). Add the listing description and drag in photos, or select browse.
  7. Deposit (optional, lettings only). Choose Traditional deposit or Zero deposit scheme. For a traditional deposit LintelCRM suggests an amount from the rent, using the Tenant Fees Act 2019 cap of 5 weeks’ rent, or 6 weeks when the annual rent is £50,000 or more. It warns you if you enter more than the cap. For a zero deposit scheme, choose the provider.
  8. Compliance (optional). There is nothing to enter here. Certificates are added after the property exists, from its Compliance tab.
  9. Review & create. Check the summary and select Create property.

Use Skip this step on an optional step, and Back to go back.

Select Save & exit to keep what you have entered. The draft is stored in your browser on this device only, so it will not appear on another computer. When you return to New Property, the draft is restored automatically and a Draft restored banner says so. Select Start over on the banner for a blank form. Photos are not kept in a draft, and a draft older than 7 days is dropped.

You return to the Properties list and the new property appears. Photos picked in the form are attached to the first unit. If the photo upload fails, the property is still created and you can add photos later. See Photos and documents.

Open the property to see its tabs: Overview, People, Brochure, Financials, Compliance, Deposits, Applications, Documents, Maintenance, Viewings & Keys and Activity. Which tabs you see depends on your role, the property being for let or for sale, and your plan. Next, add the safety certificates in Compliance certificates, or start a tenancy: Create a tenancy.

To change a property later, select Edit Property on the property page. It uses the same steps, and moving a property between letting and sale is done on its Type & purpose step.

Move a property between To Let and For Sale

Section titled “Move a property between To Let and For Sale”

You change a whole property’s listing purpose in Edit Property, on the Type & purpose step. LintelCRM refuses the change, with the reason, when it would contradict what is recorded:

  • To For Sale is refused while the property has let or let-agreed units, active tenancies or open tenancy applications: “This property has active tenancies. End them before putting it up for sale.” A let property is not moved to For Sale to sell it: it stays To Let and gets a sales instruction instead. See Sell a property that has a tenant.
  • To To Let is refused only while the property is on the market for sale with vacant possession: “This property is on the market for sale with vacant possession. Withdraw or complete the sale, or move the instruction back to Pre-market, before listing the property to let.” A property being sold with a sitting tenant, or one whose sale is still Pre-market, can be listed To Let.

A property with one unit is always changed as a whole, this way.

A property with more than one unit can have each unit listed on its own, so that Flat 1 is for sale while Flats 2 to 4 are to let. Use it for mixed blocks where the flats for sale are sold empty.

Flats sold with a tenant need their own property. In LintelCRM the landlord is recorded for a whole property, not for one unit. So flats that may be sold separately with a tenant in place must be set up as separate properties, one property for each flat (for example “Flat 1, Fenwick House” as a single-unit property), not as units of one block. Each then has its own landlord, ledger and hand-over to its buyer. A landlord for each flat inside one property is planned for a later version.

  1. Open the property and select the unit (for example Flat 4).
  2. The panel above the tabs says how that unit is listed, for example “Flat 4 is listed To let with the whole property.”
  3. Click List Flat 4 for sale (or List Flat 4 to let) and confirm. The first time you do this on a property, the confirmation explains that each unit of the property will then be listed on its own; the other units keep the purpose they had.

A message confirms “Flat 4 is now listed for sale.” From then on:

  • The property page follows the unit you select: the sale tabs and sale panel on a flat for sale, the lettings tabs on a flat to let. The panel reads “Each unit of this property is listed on its own.”
  • Each flat for sale has its own sales instruction, its own vendor and its own sale status. The building’s status is not moved by one flat’s sale. See Register vendors and instruct a property for sale.
  • The Properties list tags the property, for example “Mixed · 1 for sale · 3 to let”.
  • Your website feed and the brochure show each flat as its own listing, and Embed enquiry form on a flat gives that flat’s own form.
  • No money is touched: rent, deposits, ledgers and commission stay as they are.

The button is greyed out, with the reason, when the change cannot be made:

  • A flat cannot go for sale while it is let or let agreed (“Flat 1 is let or let agreed. End or cancel that letting before putting it up for sale.”) or has an active tenancy. LintelCRM also refuses it while the flat has open tenancy applications. A let flat that is to be sold with its tenant should be its own single-unit property, as explained at the top of this section: a sale of one unit of a multi-unit property cannot be handed over to the buyer.
  • A flat cannot go to let while it is on the market for sale with vacant possession. A flat whose sale is Pre-market, or with a sitting tenant, can.

To list the whole block as one again, change the purpose in Edit Property: every unit then gets that purpose. This is refused while any flat has a live sales instruction, and a block with a flat already sold stays listed unit by unit.

One limit to know: on a property with more than one unit, a completed sale cannot be handed over to the buyer with Hand over to the buyer, because the landlord is recorded for the whole property. What to do instead: set up each flat that may be sold with its tenant as a separate property before you instruct it. A landlord for each flat is planned for a later version. See Sell a property that has a tenant.

“Please complete the highlighted fields to continue.” A required field on the current step is empty or invalid. Fix the fields marked in red.

I cannot see New Property. Your role does not include creating properties. Ask an admin.

The deposit step warns about a cap. The deposit you entered is above the legal cap for the rent. Lower it. A deposit above the cap cannot be recorded. Check GOV.UK for the rules that apply to your tenancy.

I cannot find my draft. Drafts live in one browser on one device. Open the same browser you used before.