Report and manage maintenance jobs
A maintenance job records a repair at a property from the moment it is reported until it is completed or cancelled. You find jobs under Operations then Maintenance Jobs. Maintenance is on the Professional plan and above.
Before you start
Section titled “Before you start”- The property (and, if relevant, the unit) must exist.
- To assign a job you need a contractor in Operations then Contractors.
- You need permission to create and edit maintenance jobs.
Report a job
Section titled “Report a job”- Go to Operations then Maintenance Jobs and select Report Issue.
- Where is the issue? Choose the Property and, optionally, the Unit.
- What is the issue? Enter a Title (at least 3 characters) and Description (at least 10 characters), both required, a Category and a Priority. Describe it as you would to the contractor: the tenant sees the title on their portal.
- Schedule & review: optionally set the Scheduled date and a Contractor. Both can be added later.
- Confirm to create the job.
Categories are Plumbing, Electrical, HVAC, Carpentry, Painting, Roofing, Appliance, Landscaping, Pest Control, Cleaning, General and Other. Priorities are Low, Medium, High and Emergency.
Jobs reported by a tenant through the portal also appear here with a Tenant portal badge. If the tenant marked it High or Emergency, it also shows Awaiting triage until you confirm or change the priority. See Tenant portal.
Job statuses
Section titled “Job statuses”| Status | Meaning |
|---|---|
| New | Reported, no contractor yet |
| Assigned | A contractor is booked |
| Overdue | Its scheduled date has passed and work has not started |
| In progress | Work has started |
| On hold | Paused, with an optional reason shown on the job |
| Completed | Finished |
| Cancelled | Closed without being done |
Filter the list by Status and Priority. A job’s scheduled date passing only turns a waiting job (New or Assigned) Overdue; a job in progress or on hold keeps its status when you reschedule it.
Start, pause and resume work
Section titled “Start, pause and resume work”Once a contractor is on the job, track where the work stands with three actions, on the job’s menu in the list and at the bottom of the job page. You need permission to manage maintenance jobs, the same as for completing or cancelling; view-only users do not see them.
- Start work is offered on New, Assigned and Overdue jobs. The job becomes In progress and the start time shows as “Started” on its timeline. The property’s activity records “Work started on a maintenance job”, and if the tenant reported the job in the tenant portal they are told work has started.
- Put on hold is offered on any open job that is not already on hold. In Put job on hold you can give a Reason (optional), for example waiting for parts or for the landlord’s approval. The reason shows on the job (“On hold because …”) and in the property’s activity, but not to the tenant or the landlord; a tenant who reported the job is told it is on hold. While a job is on hold you can still change the contractor or the date, complete it or cancel it.
- Resume is offered only on a job on hold. It goes back to In progress if work had started, otherwise back to Assigned, Overdue or New, and the hold reason is cleared.
While work is in progress you cannot change the contractor: Assign or Reassign is greyed out with “Work is in progress. Put the job on hold to change the contractor.” Put the job on hold, change the contractor, then resume.
Work a job
Section titled “Work a job”Use the menu on a job, or open it, to:
- Assign or Reassign a contractor. Not available while work is in progress (put the job on hold first) or once the job is completed or cancelled.
- Schedule or Reschedule it with a new date and time.
- Edit the title, description, category, priority or scheduled date.
- Add quote under Contractor quotes: choose the contractor, enter the Amount and Valid until, and say what the quote covers. A draft quote has Submit for decision and Withdraw; a submitted quote has Approve, Decline (with an optional note), Ask landlord and Withdraw. Ask landlord sends the quote to the landlord for approval (they are notified and decide under Approvals in their landlord portal, with an optional comment; an unanswered request can expire); the quote then shows Awaiting landlord, Landlord approved or Landlord declined. Cancel landlord request withdraws the request.
- Reply to the tenant in the conversation panel on a tenant-reported job. Anything you send reaches the tenant in their portal. Tenant photos show on the job.
Assigning a contractor to an Emergency job that has no approved quote is allowed only if the landlord’s management agreement gives emergency authority: always, or up to a spend limit that covers the job’s estimated cost. The job then shows Emergency pre-authorised and the landlord is told. Otherwise LintelCRM refuses with “Landlord approval is required before instructing this emergency job”: get a quote approved first. The same check runs if you raise an assigned job to Emergency.
Complete or cancel a job
Section titled “Complete or cancel a job”- Open the job and select Complete job (in the job list, open the row menu and select Complete). The Mark job complete window opens.
- Enter Completed on (not in the future) and the Actual cost.
- Select Mark complete. A job with a scheduled visit can be completed only from the visit date onwards: before that, Complete is greyed out with “You can’t complete this job before its scheduled date. Reschedule it if the work is already done.” A backdated completion cannot be before the visit day.
If a completed job’s cost was wrong or left blank, an owner or admin can select Correct cost on the job, enter the correct total and a reason; see How maintenance costs reach a landlord’s statement.
To cancel, choose Cancel and give a Reason of at least 10 characters.
What happens next
Section titled “What happens next”When a job is completed with an actual cost and the property has a landlord, the cost is posted to the landlord’s ledger as a maintenance cost and flows onto their statement. See Maintenance costs and Landlord ledger. A job completed with no cost posts nothing. If the job has an approved quote you must enter the actual cost: only an Owner or Admin can complete it with no cost. Completed and cancelled jobs are closed to further editing.
Automatic gas safety and EICR renewal jobs and the tenant
Section titled “Automatic gas safety and EICR renewal jobs and the tenant”When a gas safety certificate or EICR is about to expire, LintelCRM raises a renewal maintenance job automatically. Which household that job is for depends on the property:
- A single home (one unit). The job is linked to the tenancy living there on the certificate’s expiry day. When you book the visit (schedule or reschedule the job), it is linked again to the tenancy living there on the visit day, so a tenant who has moved in since is the one told. That tenancy’s tenants get the visit access notice and see the visit in their tenant portal.
- A property with several units (for example an HMO or a block). The job stays property-wide and is not linked to any one tenancy, so no tenant is notified automatically. Tell the households about the visit yourself.
In the tenant portal the job does not show your staff wording. Tenants see “Compliance visit: gas safety check” or “Compliance visit: electrical safety check”, with the note “A safety check your home must have by law. The contractor or your letting agency will be in touch to arrange access.” Jobs reported by a tenant or by your team are never re-linked to another tenancy.
How long repair records and contractor details are kept
Section titled “How long repair records and contractor details are kept”LintelCRM keeps repair records for as long as your agency may need them, then removes the personal data in them automatically, in line with UK GDPR:
- Repair photos and contractor quote documents on a job are deleted 72 months (6 years) after the job was completed or cancelled. They are kept longer while the deposit of that tenancy is still open. Property and unit photos are not affected.
- A tenant’s comments on a repair are included when that tenant asks for a copy of their data. When the tenant’s personal data is erased or removed at the end of its retention period, their comments read “[deleted]”. Your team’s and the contractor’s comments stay as the repair record.
- Contractor details. A contractor’s name, email, phone number and address are anonymised 72 months after their last job, quote or invoice (a contractor never given work counts from the day they were added). A contractor with a job still open is never anonymised. Jobs, quotes and costs stay, and so does the contractor’s business name, so your figures and landlord statements do not change.
- A contractor who asks to be erased. The request is refused while a job is open with them and for 72 months after their last job, quote or invoice, because your agency must be able to show who it paid. After that their contact details are cleared in the same way.
Common problems
Section titled “Common problems”Complete is greyed out. The job’s scheduled visit is still in the future. If the work is already done, reschedule the visit to today, then complete it.
Assign is missing or greyed out. The job is completed or cancelled, or work is in progress: put it on hold to change the contractor, then resume.
“Add quote” is disabled. The job is closed and cannot take new quotes.
The cost did not reach the landlord. Check that the property has a landlord assigned and that you entered an actual cost above zero.